IoT・HCI｜高桥亮东京大学

IoT / HCI｜IoT・HCI

A Cuttable Wireless Power Transfer SheetProc. of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies (ACM IMWUT), 2018

PneuModule: Using Inflatable Pin Arrays for Reconfigurable Physical Controls on Pressure-Sensitive Touch SurfacesProceedings of the 2020 CHI Conference on Human Factors in Computing Systems (ACM CHI'20), 2020

可用剪刀裁剪的无线充电薄片，以及向水溶性流道注入液态金属的 3D 打印——设计让任何人都能重新塑造电子器件的制造方法。

电子器件一旦制成，形状便固定下来。传感器的最佳位置因人、因用途而异，但用导电线缝合后就无法再移动。

因此，研究对象正是「可改造的制造方法」本身。采用 H 树布线的无线充电薄片，即使用剪刀裁剪，剩余部分仍能继续工作。将液态金属注入 3D 打印的水溶性流道，可通过溶解模具回收金属，四次重制后仍能回收 98%。机器编织把供电与通信总线织入布料，配合可磁性移位的传感器，布局便能反复调整。

论文7

* 第一作者　† 通讯作者

期刊1

A Cuttable Wireless Power Transfer Sheet

R. Takahashi*†, T. Sasatani, F. Okuya, Y. Narusue, and Y. Kawahara

Proc. of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies (ACM IMWUT), Vol.2, No.4, Article No. 190 (2018年12月).

DOI YouTube

@article{Takahashi_2018,
  title={A Cuttable Wireless Power Transfer Sheet},
  volume={2},
  ISSN={2474-9567},
  url={http://dx.doi.org/10.1145/3287068},
  DOI={10.1145/3287068},
  number={4},
  journal={Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies},
  publisher={Association for Computing Machinery (ACM)},
  author={Takahashi, Ryo and Sasatani, Takuya and Okuya, Fuminori and Narusue, Yoshiaki and Kawahara, Yoshihiro},
  year={2018},
  month=Dec,
  pages={1–25}
}

国际会议4

Machine-knittable, Magnetically-Plug-n-Play E-Textile Prototyping

Y. Li*, R. Takahashi*†, W. Yukita, I. Wicaksono, K. Matsutani, Y. Iwamoto, S. Lee, T. Yokota, T. Someya, and Y. Kawahara

2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), To appear, Pittsburgh, USA (2026年10月).

arXiv

@inproceedings{li2026machineknittable,
  title = {Machine-knittable, Magnetically-Plug-n-Play E-Textile Prototyping},
  author = {Y. Li and R. Takahashi and W. Yukita and I. Wicaksono and K. Matsutani and Y. Iwamoto and S. Lee and T. Yokota and T. Someya and Y. Kawahara},
  booktitle = {2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)},
  note = {To appear},
  address = {Pittsburgh, USA},
  year = {2026},
  month = oct
}

3D-printing water-soluble channels filled with liquid metal for recyclable and cuttable wireless power sheet

T. Sato*, R. Takahashi, K. Yamagishi, T. Someya, M. Hashimoto, E. Iwase, Y. Kawahara, J. Kurumida, and W. Iwasaki

2026 IEEE 39th International Conference on Micro Electro Mechanical Systems (MEMS), VII-b-2, Salzburg, Austria (2026年1月).

DOI arXiv

@inproceedings{Sato_2026,
  title={3D-Printing Water-Soluble Channels Filled with Liquid Metal for Recyclable and Cuttable Wireless Power Sheet},
  url={http://dx.doi.org/10.1109/mems64181.2026.11419301},
  DOI={10.1109/mems64181.2026.11419301},
  booktitle={2026 IEEE 39th International Conference on Micro Electro Mechanical Systems (MEMS)},
  publisher={IEEE},
  author={Sato, Takashi and Takahashi, Ryo and Yamagishi, Kento and Someya, Takao and Hashimoto, Michinao and Iwase, Eiji and Kawahara, Yoshihiro and Kurumida, Junya and Iwasaki, Wataru},
  year={2026},
  month=Jan,
  pages={1–4}
}

Plug-n-play e-knit: prototyping large-area e-textiles using machine-knitted magnetically-repositionable sensor networks

Y. Li*, R. Takahashi, W. Yukita, K. Matsutani, C. Caremel, Y. Iwamoto, S. Lee, T. Yokota, T. Someya, and Y. Kawahara

Proceedings of the Nineteenth International Conference on Tangible, Embedded, and Embodied Interaction (TEI '25), Article No. 56, pp. 1-7, Bordeaux, France (2025年3月).

DOI arXiv

@inproceedings{Li_2025,
  series={TEI ’25},
  title={Plug-n-play e-knit: prototyping large-area e-textiles using machine-knitted magnetically-repositionable sensor networks},
  url={http://dx.doi.org/10.1145/3689050.3705973},
  DOI={10.1145/3689050.3705973},
  booktitle={Proceedings of the Nineteenth International Conference on Tangible, Embedded, and Embodied Interaction},
  publisher={ACM},
  author={Li, Yifan and Takahashi, Ryo and Yukita, Wakako and Matsutani, Kanata and Caremel, Cedric and Iwamoto, Yuhiro and Lee, Sunghoon and Yokota, Tomoyuki and Someya, Takao and Kawahara, Yoshihiro},
  year={2025},
  month=Mar,
  pages={1–7},
  collection={TEI ’25}
}

🏅PneuModule: Using Inflatable Pin Arrays for Reconfigurable Physical Controls on Pressure-Sensitive Touch Surfaces

C. Han*, R. Takahashi, Y. Yahagi, and T. Naemura

Proceedings of the 2020 CHI Conference on Human Factors in Computing Systems (ACM CHI'20), pp. 1-14 (2020年4月).

Honorable Mention Award

DOI YouTube

@inproceedings{Han_2020,
  series={CHI ’20},
  title={PneuModule: Using Inflatable Pin Arrays for Reconfigurable Physical Controls on Pressure-Sensitive Touch Surfaces},
  url={http://dx.doi.org/10.1145/3313831.3376838},
  DOI={10.1145/3313831.3376838},
  booktitle={Proceedings of the 2020 CHI Conference on Human Factors in Computing Systems},
  publisher={ACM},
  author={Han, Changyo and Takahashi, Ryo and Yahagi, Yuchi and Naemura, Takeshi},
  year={2020},
  month=Apr,
  pages={1–14},
  collection={CHI ’20}
}

国内发表2

液体金属を充填した3D印刷水溶性流路によるリサイクル可能なフレキシブル電子デバイス

佐藤峻*,高橋亮,山岸健人,染谷隆夫,橋本道尚,岩瀬英治,川原圭博,来見田淳也,岩﨑渉

第16回マイクロ・ナノ工学シンポジウム, 12P2-PN-92, 宇都宮 (2025年11月).

ファイナリスト

@inproceedings{佐藤2025d,
  title = {液体金属を充填した3D印刷水溶性流路によるリサイクル可能なフレキシブル電子デバイス},
  author = {佐藤峻 and 高橋亮 and 山岸健人 and 染谷隆夫 and 橋本道尚 and 岩瀬英治 and 川原圭博 and 来見田淳也 and 岩﨑渉},
  booktitle = {第16回マイクロ・ナノ工学シンポジウム},
  note = {12P2-PN-92},
  address = {宇都宮},
  year = {2025},
  month = nov
}

切断により形状の変更が可能な無線電力伝送シートの設計の一検討

高橋亮*†,笹谷拓也,奥谷文徳,成末義哲,川原圭博

信学総大 2018, B-21-19, 東京, 日本 (2018年3月).

@inproceedings{高橋2018x,
  title = {切断により形状の変更が可能な無線電力伝送シートの設計の一検討},
  author = {高橋亮 and 笹谷拓也 and 奥谷文徳 and 成末義哲 and 川原圭博},
  booktitle = {信学総大 2018},
  note = {B-21-19},
  address = {東京, 日本},
  year = {2018},
  month = mar
}

← 返回首页